Grey Bruce Makers Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

These are my disorganized notes regarding the Einscan HX software.

Black and dark surfaces require the laser.

Scanning at 0.1mm creates too many points, just use 0.5mm.

Einscan calls a scan a "project". Scans (projects) are grouped together in Project Groups. When scanning even a small part, expect to do several scans. In other words, create several projects then align the projects before generating the mesh.

The workflow with the software is something like this:

  * assemble the hardware.
  * calibrate the scanner
  * select laser or rapid (optical)
  * create a project group 
  * repeat these steps until the object is completed scanned:
  - create a project (the first project is created automatically)
  - do the scanning.
  - trim the scan using the editing tools
  - save the trims
  - generate a pointcloud for this scan

Grey Bruce Makers Wiki

User Tools

Site Tools

Page Tools